Build a platform
Pick how much memory you need, and for every CPU on the site you get the cheapest complete platform from live listings: the chip, a board that runs it and the memory to fill it. The chart plots total price against speed, AI writing speed or gaming, and draws a line through the best-value builds.
Builds
Live on eBayThis page works out the builds in your browser: it needs JavaScript.
Prices include shipping and come from live eBay listings. They don't include a case, power supply or cooler. Builds are single-socket (a dual-socket board gets one chip). The writing speed is an estimate from the build's memory bandwidth (llama.cpp gets about 35-60% of it); a model that doesn't fit the memory picked isn't shown.
How the builds are made
Each build uses the chip's cheapest plain listing and the cheapest listed board that runs the chip's generation (judged by the board's model and revision, its chipset, or what an unknown board's title says), or a combo of board and chip when that's cheaper. The memory is the type the platform takes: registered ECC RDIMMs for EPYC, Xeon and Threadripper PRO / TRX50, and unbuffered sticks for Ryzen, Core and the rest, in DDR4 or DDR5 at the platform's rated speed or faster when that's listed. The build puts one stick in each memory channel when the amount allows, or two per channel when the board has the slots, using the cheapest sticks listed, bought as listed. A board's slot count comes from its maker's specs. A desktop board of unknown model is assumed to have 4 (2 when Mini-ITX), and a server board of unknown model one per channel. When the cheapest build leaves memory channels empty because the board has fewer slots than the chip has channels, the cheapest build that fills them is shown too. Check the board's memory support list before you buy. With "expand later", the build starts with 2, 4 or one per channel of the largest stick size listed that the board takes (up to 256 GB registered or 64 GB desktop DDR5, and no more than the platform's maximum memory divided by the board's slots), then grows to every slot filled with the same sticks at today's prices. You see the cheapest start, plus the board with the most room to grow when that's a different one. The PCIe generation is the chip's, or the board's when its slots are slower (the first SP3 boards run PCIe 3.0 with an EPYC 7002 or 7003). On desktop boards it's the graphics slot's: PCIe 5.0 only on B650E, X670E, X870, X870E and Intel's Z boards, and a board whose chipset we don't know counts as 4.0. GPU host mode is for builds where GPUs do the work. It pairs every chip with the cheapest board of each kind (x16 slots, memory slots, PCIe) and ranks them per dollar by the CPU's PCIe lanes, by the slots that run at x16 at the same time with one chip in the board, or by the most memory the build takes (memory slots × the biggest stick, up to the chip's limit). The x16 counts come from the makers' specs. A desktop CPU counts as one, and boards whose specs we couldn't confirm show as not known. Check the slots' spacing too, since most big cards take three.